November 30, 2022

Five Common Mistakes People Make When Using A Solvent Trap

Keeping a strict cleaning regimen for your firearm is extremely important. Usually, poor cleaning is a significant cause of damage. Some people also have no idea how to properly use a solvent trap.

Cleaning your firearm regularly with a solvent will ensure that your firearm lasts for a very long time. But it has to be done properly. In this article, you’ll see some of the most common mistakes people make when using a solvent trap as well as the right way to do it.  

What are the most common mistakes people make when using a solvent trap?

1. Not purchasing the right solvent trap suitable for their firearm.

Some rifles require an aluminum solvent trap while others require a steel solvent trap. There are many types of solvent traps in the market. You must get one that is best for your firearm.

2. Buying only the solvent trap.

Your firearm and solvent trap will last longer if you buy a solvent trap cleaning kit instead of just the solvent trap.

3. Cleaning only once with the solvent.

For thorough cleaning, use several wet patches instead of only one. If you use the solvent trap properly, you won’t have to worry about spillage.

4. Not Using a Solvent Trap Spacer

Cleaning a firearm tends to get messy. To avoid this, you should use a solvent trap spacer to catch the excess liquid.

5. Dipping a brush into the solvent.

If you do this, your solvent will be contaminated.  Take your time while cleaning your firearm.

What is the right way to use a solvent trap to clean a rifle? 

1. Take the piece apart

2. Using a loose patch, soak it in the solvent and push it through the barrel. Do this repeatedly until the patches no longer come out of the barrel looking black. This procedure wets the bore and eliminates any loose powder.

3. When you push the wet patch in the barrel, leave it in for 10-15 minutes and then pull it out. Use as many patches as you need until the barrel is clean.

4. Push a wet brush through the barrel until it comes out through the muzzle. Don’t dip the brush into the aluminum solvent as it will contaminate it. Be careful not to pull the brush out when its bristles are still in the bore.

5. Use 15-20 strokes of your brush to clean out the barrel and repeat the procedure in step 1 with clean, dry patches.

6. When you see that the patches are coming out clean, remove the bore and clean the chamber with some tissue paper to get rid of excess solvent and dirt.

7. Carefully remove the dirt in the bolt lug, or else it will gall the action and the bolt lug.

8. Using a small amount of grease, apply it to the back of the bolt lugs. You don’t have to lubricate the trigger mechanism, but if you must, ensure that you use a dry lubricant. Always ensure that the trigger is cleaned and dry as grease and oil will only attract dirt.

9. Make sure to keep the stocks away from water. Your precision rifle will consistently sustain its point of impact and accuracy if the stock is continuously stable. Keep the stock away from humid environments.

You can purchase your solvent trap and cleaning kit at https://armoryden.com/

Conclusion

To ensure that our firearms function for a long time, we need to keep them clean. Using a solvent trap is a great way to remove dirt and buildup from the most intricate parts of your firearm. However, it has to be done correctly to get good results.